3/4 shaft collar

Merchandise Description

Casing Oscillator KRT150

 

one. Description

Higher embedding strain can be accomplished by Casing oscillator as an alternative of Casing Travel Adapter, Casing can be embedded even in difficult layer.
Casing oscillator owns such deserves as sturdy adaptability to geology, high quality of accomplished pile, minimal sound, no mud contamination, slight influence to former foundation, simple control, minimal value, and so on. It owns advantages in pursuing geological circumstances: instable layer, underground slip layer, underground river, rock development, previous pile, erratic boulder, quicksand, basis of emergency and momentary creating.
It is specifically suited for coast, beach, previous town wasteland, desert, mountain location and the area surrounded by properties.
 

2. Technical specs

KRT150 Casing Oscillator Specialized Specification
Casing diameter mm 600/800/a thousand/1200/1500
Max. Working stress Mpa 28
Max.torque KN.m 1500
Rotation angle o ±10o
Stroke mm 450
Max. lifting drive KN 2050
Height of Mainframe mm 650
All round fat Kg 19000
Mainframe stress KN 1050
Equilibrium weight force KN 900
Clamping drive(clamp) KN 2200
Clamping power(sub clamp) KN 280
Width of relationship box mm 560
Width of tail mm 1600
Width of base body mm 2720
Total size mm 4285
Top of tail mm 1170
Height of connection box mm 580
Relationship box pin shaft stroke mm sixty
Height of jaw mm 630
Peak of mechanical fixture mm 1150
All round Height mm 1780

 

3.Competitive Gain

(1) Minimal acquire and transportation expenses for the shared utilization of rig pump instead of particular pump truck.

(2) Low operation expense for the sharing of output power of rotary drilling rig, energy preserving and environmental helpful.

(3) Extremely-huge pull/press pressure up to 210t is equipped by lifting cylinder and the massive can be reached with included counter-bodyweight to speed up construction.

(4) Dismountable counterweight from 4 to 10t as required.

(5) Reduction in transport value for the counterweight is made of forged-in-location concrete.

(6) Function stably-combined action of counterweight frame and floor anchor correct the bottom of oscillator to the ground firmly and minimize the reaction torque created by oscillator to rig.

(7) Substantial doing work effectiveness for the automated casing oscillation after 3-5m casing-in.

(8) The distance among oscillator and rig can be altered conveniently due to bolt connections.

(9) Included anti-torsion pin of clamping collar to guarantee 100% torque transfer to casing.

(10) .6-1.5m casing diameter with various clamping collar to fulfill customers’ demands.

 

four. Utilizing Problems

1.When the strata problems are unstable, Casing is needed to be driven to total depth to stop hole’s collapse. It is referred to as All Casing strategy (Benoto Technique, Shaft Drilling).
2.To drive the Casing and retract it right after concreting, Casing Oscillator is strongly advisable to use.
3.With its outstanding oscillating torque and lifting force, the equipment exhibits the best functionality of driving and retracting the casing.
4.If it is used collectively with Hammer Seize, it demonstrates the quickly excavating speed with its massive quantity of jaw and it is obtainable for excavating gravels and boulders layer.

five. Design Photos

6.Packing & Transport

7.Our positive aspects 

eight.Exhibition

nine.Certification

ten.FAQ
Q: Why decide on us?
  We are skilled factory with total export knowledge. We make positive all certified goods with substantial top quality reach
international standard
  As seasoned exporter, we can give specialist advice in transportation technique to reduce your cost.
Q: How can I know the generation situation?
  Right after obtaining down payment, monetary confirmation payment letter will be provided to you. If essential, you will get video clips and photos from production division, good quality department and package.
Q: Can I print very own logo on package?
   Sure. Customized package and OEM printing are accessible.
If you have other queries, welcome to get in touch with us!
 

To Be Negotiated 1 Piece
(Min. Order)

###

Type: Drill
Pressure Pile Driver Type: Hydraulic Pile Driver
Power Source: Diesel
Noise: Without Noise
Certification: CE, ISO 9001:2000
Condition: New

###

Customization:

###

KRT150 Casing Oscillator Technical Specification
Casing diameter mm 600/800/1000/1200/1500
Max. Operating pressure Mpa 28
Max.torque KN.m 1500
Rotation angle o ±10o
Stroke mm 450
Max. lifting force KN 2050
Height of Mainframe mm 650
Overall weight Kg 19000
Mainframe pressure KN 1050
Balance weight pressure KN 900
Clamping force(clamp) KN 2200
Clamping force(sub clamp) KN 280
Width of connection box mm 560
Width of tail mm 1600
Width of base frame mm 2720
Overall length mm 4285
Height of tail mm 1170
Height of connection box mm 580
Connection box pin shaft stroke mm 60
Height of jaw mm 630
Height of mechanical fixture mm 1150
Overall Height mm 1780
To Be Negotiated 1 Piece
(Min. Order)

###

Type: Drill
Pressure Pile Driver Type: Hydraulic Pile Driver
Power Source: Diesel
Noise: Without Noise
Certification: CE, ISO 9001:2000
Condition: New

###

Customization:

###

KRT150 Casing Oscillator Technical Specification
Casing diameter mm 600/800/1000/1200/1500
Max. Operating pressure Mpa 28
Max.torque KN.m 1500
Rotation angle o ±10o
Stroke mm 450
Max. lifting force KN 2050
Height of Mainframe mm 650
Overall weight Kg 19000
Mainframe pressure KN 1050
Balance weight pressure KN 900
Clamping force(clamp) KN 2200
Clamping force(sub clamp) KN 280
Width of connection box mm 560
Width of tail mm 1600
Width of base frame mm 2720
Overall length mm 4285
Height of tail mm 1170
Height of connection box mm 580
Connection box pin shaft stroke mm 60
Height of jaw mm 630
Height of mechanical fixture mm 1150
Overall Height mm 1780

How to Choose the Right Shaft Collar

A shaft collar is a small, inexpensive machine component that serves a variety of purposes in power transmission. It is most commonly used in gearboxes and motors. It can serve as a mechanical stop, bearing face, or locating component. Its simple design makes it easy to install. Here are some of the most common types and their functions.
Shaft Collar

Function

Shaft collars are an important part of many mechanical systems. These devices hold mechanical components on a shaft and also help mount shafts on flat surfaces. They are available in many different styles, sizes, and materials. Selecting the right shaft collar is essential in preventing damage to components. Stafford Manufacturing, a leading manufacturer of shaft collars and other related mechanical components, can help you choose the right one for your application.
There are two main types of shaft collars. The first is the Heavy Duty type. It has a larger outer diameter and wider opening. While this may seem to increase holding power, the problem with that is that it can reduce the amount of space the collar has on the shaft. On the other hand, the Thin Line type is similar, but is made with smaller outer diameters. Another type is the Threaded Bore shaft collar. These shaft collars offer exceptional axial holding power, and are designed to protect threaded shafts without causing any damage.
A shaft collar has many uses and is typically used in industrial applications. It can act as a spacer and to stop shaft movement in reciprocating applications. It can also be used to align and position parts of automation machinery.

Types

There are several different types of shaft collars. These components are critical for a variety of applications, and their design plays a large role in the performance of the resulting product. To select the most appropriate collar, designers must consider several factors, including the style, material, bore size, and geometry of the shaft. Many manufacturers provide performance data, and users can contact them for assistance.
There are many different types of shaft collars, which make it important to understand how each one works and what applications they can serve. Fortunately, shaft collars are easy to install and require little maintenance. Whether you need to secure industrial railings or position medical equipment, shaft collars are a versatile component that can be tailored to meet your needs.
One type of shaft collar is the locking collar. This type of shaft collar has a threaded end that is designed to mate with spindle bearings. They offer an increased TIR than standard shaft collars and allow for precise preload control. They also feature slots for spanner wrenches.
Shaft Collar

Sizes

Shaft collars come in a variety of sizes. You can get a small diameter shaft collar for small equipment, or a large diameter shaft collar for larger equipment. Both styles are made from solid steel, and they come in several thicknesses. You can choose between one-half inch and six-inch collars, depending on your needs.
There are no specific standards for shaft collars, but most manufacturers have similar designs. They’re either single-point faced or double-split, and can be fine or coarse threaded. They’re often used as mechanical stops, bearing faces, or as locating components. Their bore is either fine or coarse, and their outside diameter and width are determined by the shaft diameter.
Shaft collars are commonly found in mechanical and automation equipment. These ring-shaped devices hold motor components, sprockets, and bearings in place. They also allow them to be adjusted and positioned precisely. A shaft collar is often used to connect the end of a shaft to a mechanical stop.
Another type of shaft collar is called a set collar. It has a recessed area for a screw to bite into a shaft. These collars are perfect for holding sprocket hubs, bearings, and spacers. They can also be used as a rigid coupling.

Cost

When choosing a shaft collar, consider its intended application and cost. Some shaft collars are very expensive while others are quite affordable. Choose one that meets the needs of your assembly. If you’re using the shaft collar infrequently, a clamp style or a set screw style may be a better choice. Then, you can easily adjust or disassemble it with just a few tools. If you’re using it more frequently, choose a two-piece shaft collar.
The material of the shaft collar is also an important consideration. Steel and stainless steel are common choices. While both materials are strong and durable, steel tends to have better holding power. However, aluminum shaft collars are lighter and provide better strength-to-weight ratio. The type of material you choose depends on the amount of corrosion protection you need, and whether you’ll need the collar to resist extreme temperatures. If the shaft collar is going to be used in a hot environment, you may want to go with a titanium collar.
There are many different sizes and types of shaft collars. The type of collar you choose depends on the specific application and the system it’ll be used in. Consider the dimensions of your shaft, the material of the shaft, and the length of the shaft to find the right fit. If you’re not sure what size you need, ask a manufacturer for help.
Shaft Collar

Placement on shaft

In some applications, the placement of the shaft collar can be critical to the overall performance of the machine. The collar’s design must take many factors into account, including material, style, bore size, and shaft geometry. If a user is uncertain of the proper placement of their collar, they should refer to the manufacturer’s website for guidance.
While shaft collars may look simple, they’re actually essential mechanical components that are used in almost every type of machinery. Despite their ubiquitous use in every industry, they are often underappreciated due to their complexity. Many people aren’t aware of their importance or the various types of collars available. This shaft collar guide will provide detailed information to help you find the right shaft collar for your specific application.
The surface treatment of the shaft collar is another important factor that contributes to its holding power. The most common treatment is a black oxide finish. This finish enhances screw torque while preserving the frictional properties of the bore. This finish can be further optimized by applying light oil to the screw. Zinc plating is also a good option for shaft collars. This material offers better corrosion resistance, but can reduce holding power.

Clamp style

A clamp style shaft collar is a simple and effective tool for securing shafts in machine tools. Its two-piece design allows for quick and easy positioning adjustments and has greater holding power than set screw collars. In addition, its friction-based connection maintains ease of use and prevents shaft damage. This type of collar is also more corrosion resistant than set screw collars.
There are several different types of shaft collars, including single and double split collars. Single-piece clamp collars are anchored into the shaft with a single tangential screw, whereas double-piece collars are anchored to the shaft with two socket cap screws. The latter type provides more stability and axial holding power and is suitable for rotating assemblies. A single or double-piece clamp collar can also be threaded to allow for precise positioning along the shaft. Its internal threads also provide enhanced support for high axial loads and act as a positive mechanical stop.
There are different types of shaft collars, each with its own set of advantages and disadvantages. A set-screw collar may be preferred over a clamp-style shaft collar, but it’s not the only choice. A set-screw collar can severely mar the shaft and can prevent fine adjustments. However, it is a good idea to use the torque wrench when tightening a shaft collar.

Zinc plated

Zinc plated shaft collars are available in a variety of sizes. They are precision machined from cold finished steel bar stock and zinc plated for corrosion resistance. They are also very attractive. They are made in the USA. Whether you need a zinc-plated shaft collar for a simple repair or a more complicated installation, Lovejoy has the right solution for your needs.
The CZPT MSP-12-FZ two-piece shaft collar has a 12mm bore, 28mm OD, and 11mm width. Its clamp style design allows you to easily install and remove the shaft collar. It is easily adjustable and is stamped with the CZPT name.
 3/4 shaft collar 3/4 shaft collar
editor by czh 2023-02-03

Leave a Reply

Your email address will not be published. Required fields are marked *