Intensive Custom made in China replacement parts in Sialkot Pakistan Kneader Mixer with top quality

Intensive Custom made in China  replacement parts  in Sialkot Pakistan Kneader Mixer with top quality

We – EPG Team the greatest gearbox & motors , couplings and gears manufacturing facility in China with 5 various branches. For far more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Intense RUBBER KNEADER

Mixing chamber:
It consists of a “W” shape entire body and two facet boards produced of high quality steel plates by means of extrusion forming and welding, which are jacked to consider the movement of cooling water or steam. It is plated with difficult chrome on its internal walls.
Thermal Resistance:
There is a plug-in thermal resistance in center section of the base of the chamber to be related to electrical method to inspect and display the temperate.
Rotor:
It is made to the hollow blades of Banbury sort. The hollows are related with axial hole of rotor shaft utilized as cooling or heating passage. The prime edges of blades and the finish faces of ~ rotor shaft are area welded with cobalt-base challenging alloy and grinding, then plating with challenging chrome and sharpening.
Cooling/heating technique:
A widespread piping system is adopted for either cooling or heating materials in mixing operation. Through the technique cooling water or steam is fed in a few approaches to the cavities of the rotors blades, the mixing chamber and the prime ram.
Tilting system:
It is made up of a rotor with brake, cycloidal gear reducer, TP type worm and worm gear, and so on.. It is able to actuate the mixing chamber tilting by 140° about the front rotors.
Dust sealing unit:
At the joint among the top of the mixing chamber and the cantilevered arm of the equipment body, the dust sealing assemblies with curved slotted partings are utilised obtaining an superb and dependable sealing purpose.
The stop encounter of the rotor is sealed by stop get in touch with sealing with nor oil-lubrication and is seals well and is use-resistant and sturdy.
Primary driving program:
 
The portion is made up with main motor, reducer, connecting gears. It realizes odd-pace rotation of the rotors with managing confront one other.
Pneumatic management method:
Pneumatic manage program is controlled by XG get. The bi-directional air cylinder tends to make the ram up or down. In scenario the more than load occurs in the mixing chamber, the prime ram can be elevated immediately or manually if necessary, so as to protect motor from overload.
Electric management technique:
Imported PLC system and electrical manage parts which are all imported merchandise or imported technologies goods are adopted in the electric handle method as to raise control reliability.
parameters of rubber kneader 

                    Model
Merchandise
X(S)N-
1×12~fifty eight
X(S)N-
3×32 (6-60)
X(S)N-
10×32
X(S)N-
20×32
X(S)N-
35×30
X(S)N-
55×30
X(S)N-
75×30
X(S)N-
110×30
X(S)N-
150×30
X(S)N-
200×30
Total quantity of mixing  chamber L 3 eight twenty five 45 seventy five a hundred twenty five 180 250 325 440
Wor ept volume of mixing  chamber L 1 three 10 twenty 35 55 75 one hundred ten a hundred and fifty two hundred
Driving motor power Kw four 5.five 15 thirty 55 75 a hundred and ten 185 220 280
Tilting motor electricity Kw Handbook .fifty five 1.one one.5 two.two two.2 4 4 five.5 seven.five
Tilting angle . ≤140 one hundred thirty five one hundred forty a hundred and forty a hundred and forty a hundred and forty a hundred and forty a hundred and forty a hundred and forty a hundred and forty
Rotational speed of the rotor (entrance/rear) r/min twelve~fifty eight 6-sixty
32/24.5
32/23.5 32/twenty five 30/24.five thirty/24.5 thirty/24.5 thirty/24.five thirty/24.five 30/24.5
Pressure of compressed air Mpa .5-.8 .5-.8 .5-.8 .5-.8 .5-.8 .6-.eight .6-.eight .6-.eight .6-.8 .6-.8
Capacity of compressed air M³/min ≥0.3 ≥0.three ≥0.five ≥0.7 ≥0.9 ≥1. ≥1. ≥1.5 ≥2. ≥2.
Pressure of cooling water (rubber mixing) Mpa .2-.four .2-.four .2-.4 .2-.4 .3-.four .3-.four .3-.4 .3-.4 .3-.4 .3-.four
Pressure of heating steam (plastics mixing) Mpa .5-.eight .5-.eight .5-.8 .5-.eight .5-.eight .5-.eight .5-.8 .5-.eight .5-.8 .5-.8
Overall dimension L mm 1400 1660 2580 2630 3200 3280 3330 3930 4200 4520
W 760 960 1300 1520 1900 1930 2620 3000 3300 3400
H 1914 1750 2280 2550 2950 3070 3340 3660 3900 4215
Weight Kg 800 2000 3300 4000 6500 7800 10500 16000 19500 22500

The use of unique tools manufacturer’s (OEM) element numbers or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating merchandise use and compatibility. Our organization and the listed replacement elements contained herein are not sponsored, approved, or made by the OEM.

Intensive Custom made in China  replacement parts  in Sialkot Pakistan Kneader Mixer with top quality

Intensive Custom made in China  replacement parts  in Sialkot Pakistan Kneader Mixer with top quality

Leave a Reply

Your email address will not be published. Required fields are marked *